FREE UK DELIVERY OVER £75
100% SECURE PAYMENT
National Sales 01206 867500
My Account
National Sales 01206 867500

Soil & Waste

 

Floplast Soil Pipe System Features

All Soil and Waste products have a consistent high-gloss finish and colour and are essentially maintenance free. The fittings are tough and durable, yet lightweight for ease of installation.

Our Soil and Waste system is fully compatible with our Underground Drainage products, enabling a simple push fit connection between the two.

All systems are manufactured to British/European Standards specification where applicable. Our Soil and Waste is also compatible with most other existing materials and systems that are manufactured  to British and European Standards.

Colour matching between Soil and Waste and guttering systems ensures good colour coordination when pipework is located externally.

 

Working Temperatures for Soil and Waste Pipes

Soil and Waste systems can discharge continuous flows with a temperature of up to 76 degrees C. Flows of up to 100 degrees C may be permitted without any damage to the pipes if they run for a duration of less than two minutes at any one time. This means that the Floplast Soil and Waste system is suitable for use on both domestic and most commercial installations. If you need any further clarification on discharge flow temperatures please contact us.

 

Soil Pipe Fixing Guide

Commence the soil stack from the base and work up. The pipe should be fixed with brackets at maximum 2m centres vertically and 1m horizontally. Allowance for expansion should be made by withdrawing all pipe spigots from the end of the socket by 10mm.

The use of silicon lubricant on all seals is recommended. All soil systems should incorporate suitable access points to enable testing and maintenance of the system. Further more detailed instructions including a video guide can be found in our Guides & Tips section.

Please take a look at our plumbing fittings section which contains all your essential plumbing products including copper fittings, taps and valves and Speedfit Pushfit products.

Manufactured by FloPlast to BS, Soil is available in a Push Fit (Ring Seal) range in Grey, Black, White and Cast Iron Effect. A solvent weld system is also stocked in Black or Olive Grey. Waste is available in push fit (polypropylene) or solvent Weld (ABS). Compression waste adaptors connect different systems and materials. A range of traps and pan connectors completes the above ground drainage line-up. Read more about Soil & Waste

All Soil and Waste products have a consistent high-gloss finish and colour and are essentially maintenance free. The fittings are tough and durable, yet lightweight for ease of installation.

Our Soil and Waste system is fully compatible with our Underground Drainage products, enabling a simple push fit connection between the two.

All systems are manufactured to British/European Standards specification where applicable. Our Soil and Waste is also compatible with most other existing materials and systems that are manufactured  to British and European Standards.

Colour matching between Soil and Waste and guttering systems ensures good colour coordination when pipework is located externally.

Soil and Waste systems can discharge continuous flows with a temperature of up to 76 degrees C. Flows of up to 100 degrees C may be permitted without any damage to the pipes if they run for a duration of less than two minutes at any one time. This means that the Floplast Soil and Waste system is suitable for use on both domestic and most commercial installations. If you need any further clarification on discharge flow temperatures please contact us.

When installing a soil stack, commence the soil stack from the base and work up. The pipe should be fixed with brackets at maximum 2m centres vertically and 1m horizontally. Allowance for expansion should be made by withdrawing all pipe spigots from the end of the socket by 10mm.

The use of silicon lubricant on all seals is recommended. All soil systems should incorporate suitable access points to enable testing and maintenance of the system. Further more detailed instructions including a video guide can be found in our Guides & Tips section.

Please take a look at our plumbing fittings section which contains all your essential plumbing products including copper fittings, taps and valves and Speedfit Pushfit products.

Hide details

Installation & Maintenance

How to Make a Ring Seal Joint

How to Make a Ring Seal Joint

Check out Drainage Sales' instructional video on the process of making a Ring Seal Joint - with some tip on the best methods.

Installing an Air Admittance Valve

Installing an Air Admittance Valve

The video below gives a brief explanation of how air admittance valves work, and where exactly they should be installed.

How to Connect Different Types of Waste Pipe

How to Connect Different Types of Waste Pipe

Take a look at our video for an easy solution for connecting a new waste pipes to old copper, lead, iron or other systems.

How to make a Solvent Weld Joint

How to make a Solvent Weld Joint

The process to make a solvent weld joint can easily be tackled by anyone with basic DIY skills, as demonstrated in our video.

How to connect a Waste Pipe into a Soil Pipe

How to connect a Waste Pipe into a Soil Pipe

Check out our video here for the three most common ways to connect a waste pipe from the kitchen or bathroom into a main soil stack.

Cast Iron Soil Pipe Installation

Cast Iron Soil Pipe Installation

Cast Iron Soil Pipe can now be installed using simple push-fit technology. Click here to download full instructions.

How to connect a Waste Pipe into a Soil Pipe (PDF)

How to connect a Waste Pipe into a Soil Pipe (PDF)

There are a many different ways of connecting a waste pipe into a soil pipe - take a look at our concise guide here for easy attachment.

Installing a new PVC Soil Stack

Installing a new PVC Soil Stack

Take a look at an in-depth step-by-step installation guide for a new PVC Soil Stack from Floplast, also available as a PDF document.

Installing Waste Pipes and Traps

Installing Waste Pipes and Traps

Check out a quick and easy guide to the FloPlast waste and trap systems available from us, full of tips for an effortless installation.

Soil & Waste Systems Installation

Soil & Waste Systems Installation

Quick & easy video guide on how to install your soil & waste system from our chosen partner Floplast. Click here to view it.

Back to top
FREE NEXT DAY UK DELIVERY OVER £75

Our Partners

Clark-Drain
Everbuild
FloPlast
FreeFoam
Galeco
Hargreaves Foundry
House Martin
Kestrel
Storm
Tetra Flow