Rainsmart Ellipse Soakaway Set Assembled With Silt Trap & Lid 1 Cubic Metre
|Style||With Silt Trap and Lid|
|Tonne Loading||Vertical 24.2 Tonne per sqm & Lateral 18 Tonne per sqm|
|Size||1 Cubic Metre|
This soakaway set is comprised of four Rainsmart Ellipse Soakaway Crates (24.2 tonne vertical load capacity) and sufficient non-woven geotextile membrane to wrap all outward faces of the soakaway including the base. The set also includes cable ties for holding the crates together until the side fill has been introduced.
Additionally, the set contains a Sentinel Silt Trap C/W Catchpit and Filter to filter out sediments and allow a clean flow of water into the soakaway, as well as a 300mm Square Manhole Cover and Frame.
The crates in this set are fully assembled, but you could save £30 + VAT if you buy the flat-packed version. Assembly is a very quick process, the full cubic metre set should take no more than 10-12 minutes and we throw in the rubber mallet that you need for assembly. You can view a quick video on assembling flat packed soakaways here.
The dimensions of the complete soakaway are 1430mm (L) x 800mm (W) x 860mm (D)
Rainsmart soakaway crates have a void ratio of 95% - this is the amount of free space within the crate structure that can be used for rainwater storage. The capacity of this 1 cubic metre soakaway is an impressive 935 Litres. Under normal conditions this would be sufficient to hold water from a roof area of approximately 50 square metres.
The vertical crush load capacity of 24.2 tonnes per square metre ensures that the Rainsmart Ellipse crates are safe to be used beneath gardens and pedestrian areas. The lateral crush load of 18 tonnes per square metre is the best of any type of soakaway crate currently available in the UK.
Clips are not required to hold the crates together. No clips on any crate system are structural it is always the side fill on any soakaway installation which adds the stability needed to hold the structure in place. Cable Ties are included with our 1m³ Soakaway Sets and these are used purely to hold the crates in place until the sand or gravel side fill has been added.
The Sentinel Silt Trap system ensures longevity of the soakway system - removing 99% of the silt and sand that would potentially end up in the system from surface areas. Emptying the filter on a regular basis (this is only a five minute job) will maintain the efficiency of the soakaway and greatly increase its lifespan.
All outward facing crate surfaces of any soakaway should be wrapped in non-woven geotextile membrane, which allows the free passage of water but prevents any soil or sand particles from entering the soakaway, maintaining its long term efficiency.
The 110mm (or 160mm) drainage pipe is fed into the soakaway via one of the four circular 160mm open entry points. 110mm pipes simply rest on the bottom of this opening and we recommend that the pipe is inserted approximately 300mm inside the crate. Geotextile membrane should be installed over the opening first and then a small cross should be cut in the membrane at the entry point with a sharp knife. Carefully peel back the membrane, insert the pipe and tape or clamp the membrane tightly around the outside of the pipe to stop the ingress of any soil particles.
As all four crates making up the soakaway set have a pipe entry plate, you should ensure that the three that are not being used face inside the soakaway as opposed to facing outwards this makes it easier to wrap the geotextile around the outside of the structure. Pipe entry points do not affect the structural integrity of the soakaway in any way.
For a closer look at Soakaway Crates in general, including installation tips, please take a look at our detailed video.
Orders placed by 12.00 noon will be delivered the next working day. Orders placed at weekends will be delivered on the following Tuesday. Read our delivery details for further information.
Our Returns Policy
You can return any items for a full refund (excluding any carriage charges) within 28 days of your purchase - the only exception being specially manufactured items such as fabricated gutter angles or profiles which cannot be returned. All returned items must be unused and in saleable condition. You should include a copy of your original purchase invoice with any goods that you return.
Please note that you are responsible for the cost of returning unwanted items. If you are unsure of how to go about arranging a carrier please let us know so that and we can assist you with this, although you should be aware that we cannot be held responsible for any carrier losses or damages prior to the goods being checked in at our warehouse.
Please click here to download a Goods Returns Form which you should enclose with any returned items. Our full postal address for returns is detailed on the Goods Returns Form.
Once the goods have been checked back into our warehouse we will arrange for the credit/debit card that you used for your original purchase to be refunded. Please allow fourteen days for the refund to be processed. Any items that have been ordered specially are excluded from this guarantee, as are any goods that are delivered ex-works such as sewage treatment plants or rainwater harvesting systems.
Read our returns policy for further details.
Our Returns Policy For Cast Iron Products From Hargreaves Foundry Products
If you wish to return any of our Cast Iron products, then please contact us as soon as possible. We can then liaise with the manufacturer and issue a returns form which will need to be returned to Hargreaves alongside the products. Our cast iron products come direct from Hargreaves Foundry (HF) in Halifax so returns will need to go directly back to them.
All return requests must be notified within 90 days of the goods being dispatched from HF and all damaged items must be notified within 24 hours of receipt of goods. All items must be returned in a saleable condition. Once agreed, the goods must be returned within 14 days from the date stated on the Return Form.
Please note that any bespoke items or specially painted RAL coloured items or Mech 416 Soil System pipes are non-returnable. Please be aware that all returns for Cast Iron Gutters and Soil & Drainage will incur a re-stocking charge of between 25% & 30% for exact details please view our Hargreaves returns policy.
The % charged is based on the net selling price of the original goods - this charge is unfortunately out of our control as it is levied on us by the manufacturer.
For full terms and conditions related to cast iron returns please consult our Hargreaves returns policy.