Cast Iron Ogee Gutter Fascia Bracket - 115mm Primed
Click or tap the image to open in fullscreen
Fascia brackets, also known as gutter brackets or gutter clips, are the main supports for the gutter system.
The bracket is screwed to the fascia board using two screws (we recommend 10 x 125mm). The gutter is then clipped in place by first sliding the back edge in under the rear clip and pulling gently down on the front edge to clip the gutter into position.
Deepflow fascia brackets should be spaced at 900mm centres, although if you live in an area that is prone to heavy snowfall we suggest reducing the centres.