Fascia and Soffits
Our PVC Fascia and Soffits are all manufactured by either FloPlast or Kestrel. Each system comes with a 10 year guarantee and has a class 1 fire rating. All products are BBA approved. We currently stock most ranges in five colour options - White, Black Ash, Rosewood, Golden Oak and Anthracite Grey.
MAINTENANCE OF PVC FASCIA
PVC profiles will not rot, warp, crack or erode. Boards do not require painting or any other protective treatment. To maintain an as new surface appearance, occasional washing with a non-scratch mild detergent and water will remove any surface grime particularly in a polluted atmosphere. Do not use solvents or abrasive cleaners.
FIRE RESISTANCE - PVC FASCIA, SOFFIT
Cellular Boards do not burn freely, are not easily ignitable and outperform timber in fire. Our FloPlast fascia, cover and soffit boards carry a Class 2Y surface spread of flame rating in accordance to BS 476-7: 1997, while our hollow soffit boards have achieved a Class 1Y rating. Our Kestrel bullnosed 22mm boards carry a Class 1 surface spread of flame rating in accordance to BS 476-7: 1987, while our 16mm boards carry a Class 1 surface spread of flame rating in accordance to BS 476-7: 1997. This means that although the spread-of-flame across the surface of PVC is limited, the material does tend to char and may fall away when exposed to fire.
However, it is unlikely that the roof trim system will significantly affect the overall fire performance on any roof on which it is installed. Where it is normal practice to carry the eaves box over, between dwellings, it is important that the box is firestopped at compartment walls with a proprietary fire stop material.
DURABILITY AND THERMAL EFFICIENCY OF PVC BUILDING PRODUCTS
The combined cellular core and co-extruded PVC-U surface skin ensure high durability in all conditions. PVC-U is resistant to acids, alkalis, seawater and atmospheric pollution. PVC used as a construction material has very good insulating properties, it actually improves overall thermal insulation of a composite wall construction.
HOW WORKABLE IS PVC?
Cutting, drilling, nailing and shaping are all easily achieved using conventional woodworking tools. Stainless steel pins/nails should be used for fixing. A fine-toothed blade is best when cutting with a handsaw. If using power tools, they should be operated at at least the same speed as when working with timber, ideally using carbide tipped blades. Face and eye protection should be worn.
INSTALLATION OF PVC ROOFLINE PRODUCTS
Boards should be fitted only at temperatures between 0 and 30 degrees C. Stainless steel fixings of an adequate length should be used at a maximum of 600mm centres (400mm for woodgrain). Boards should only be fixed to sound timber – you should cut out and replace any rot with treated softwood.
As all PVC building products naturally expand and contract, a 10mm gap should be allowed for thermal movement at joints and corners.
For more details please visit our Guides & Tips section.
OTHER FEATURES OF PVC BUILDING PRODUCTS
The boards come with a film protection which should be removed just prior to fitting. Boards should be stored flat and supported on a firm base at temperatures of below 30 degrees C. Screen from direct sunlight to avoid heat build up inside polythene sleeves.
All boards are manufactured with a high gloss finish with blemish free surface.
PVC FASCIA AND SOFFIT GUARANTEE
Our co-extruded cellular boards come with a ten year product guarantee in respect of performance and significant discolouration. Full details are available upon request.
Fascia & Soffits
Want some advice on how to install your fascia or soffit, or interested in finding out more about our product range, take a look at our guides & tips.