Industrial/ Xtraflo Gutter Angle - 90 Degree x 170mm Grey
|Dimension||275mm (W) x 275mm (L) x 128mm (D)|
|Guarantee||5 Years Manufacturers|
|Specification||BS EN 12200 / BS EN 607|
90 Degree Gutter Angles are used to turn the gutter around the corner of a building. As the system is symmetrical, both internal and external corners use the same fitting - there is no difference.
You should always support a gutter angle by positioning a fascia bracket within 150mm on both sides of the angle. This will prevent the fitting from sagging when it is weighed down by water or snow.
We recommend the use of SL40 silicon spray on all seals when installing our XtraFlo Industrial gutter.