Ogee Gutter External Angle - 90 Degree x 110mm x 80mm Cast Iron Effect

In stock
More Information
EAN Code 5055149920271
Angle 90 Degree
Brand FloPlast
Colour Cast Iron Effect
Dimension 174mm (W) x 174mm (L) x 97mm (D)
Guarantee 20 Year
Material PVC-u
Specification BS EN 12200 / BS EN 607 / BS EN 1462
Weight (kg) 0.292000
Size 110mm x 80mm
£18.62 £15.52
You need to spend another £250.00 to qualify for 2.5% discount.

90 Degree Gutter Angles are used to turn the gutter around the corner of a building. As the ogee system is not symmetrical, internal and external corners are different fittings.

The product image clarifies the difference but essentially if you are stood in front of an external corner, the corner goes away from you out of sight. External corners are usually used on all 90 changes of direction except at the foot of a valley, where you would use an internal corner.

You should always support a gutter angle by positioning a fascia bracket within 150mm on both sides of the angle. This will prevent the fitting from sagging when it is weighed down by water or snow.