Ogee Gutter Fascia Bracket - 110mm x 80mm Brown
Fascia brackets, also known as gutter brackets or gutter clips, are the main supports for the gutter system.
The bracket is screwed to the fascia board using two countersunk screws (we recommend 5 x 25mm or 5 x 30mm). The gutter is then clipped in place by first sliding the back edge in under the rear clip and pulling gently down on the front edge to clip the gutter into position.
Ogee fascia brackets should be spaced at a maximum of 800mm centres, although if you live in an area that is prone to heavy snowfall we suggest reducing this measurement.
You can view our quick PBSL Group generic fascia bracket video below;
For information on how to replace a broken fascia bracket, please take a look at this short video guide.