FloPlast Ogee Gutter Universal Running Outlet - 110mm x 80mm Cast Iron Effect
Click or tap the image to open in fullscreen
|Cast Iron Effect
|264mm (W) x 137mm (H) x 185mm (L)
|68mm or 80mm x 80mm
|BS EN 12200 / BS EN 607
|110mm x 80mm
A Running Outlet is the fitting which connects the guttering to the downpipe.
Essentially a tee piece, running outlets can be used at either the centre or the end of the run of gutter. If the outlet is installed at the end then a short piece of gutter with an external stopend attached is used to extend the gutter past the end of the brickwork to catch any rainfall from the overhanging tiles.
The ogee outlet has moulded screwholes to enable it to be fixed back to the fascia board. The downpipe connection is a simple push fit onto our 68mm round downpipe or 65mm square downpipe using its clever octagonal moulding.