FloPlast Ring Seal Soil Stack Complete Kit - 110mm Grey

In stock
Only %1 left
Code
STACK1G

Click or tap the image to open in fullscreen

FloPlast Ring Seal Soil Stack Complete Kit - 110mm Grey
More Information
Code STACK1G
£99.88 £83.23 £124.85 Save 20%
Spend another £1500 to pay over time with Klarna

This Soil Stack set contains the basic poducts to build or replace a soil stack, namely;

  • 3 x 3m 110mm Soil Pipe with Ring Seal Single Socket
  • 2 x Additional Push Fit Couplings
  • 3 x Pipe Clips
  • 1 x 87.5 Degree Junction
  • 1 x Vent Terminal 
  • 1 x 250ml Solvent Weld

Additional components can be added as required. If you plan to terminate the Soil Stack within the roofspace you should use an Internal Air Valve AV110. If the soil pipe penetrates through the roof covering we recommned using the SP320 Weathering Slate to ensure a watertight seal.

Ring Seal Soil Systems

_x000D_

Ring Seal Soil and vent is the most commonly used soil system in domestic and non-industrial commercial properties in the UK.

_x000D_

Our FloPlast ring seal soil system is compatible with most other soil systems that are manufactured to British/European standard.

_x000D_

To install any pipe or fitting into another ring seal fitting, first make sure the end of the pipe has been chamfered. Clean off any dirt or debris and lubricate the joint with silicon lubricant. Push the pipe in squarely until resistance is felt, then withdraw it very slightly to allow for any potential system expansion.

YOU MAY ALSO LIKE