Square Steel Gutter Internal Corner - 125mm Graphite

In stock
Code
STAL2CIG

Click or tap the image to open in fullscreen

Square Steel Gutter Internal Corner - 125mm Graphite
More Information
Code STAL2CIG
EAN Code 0691208255806
Angle 90 Degree
Brand Galeco
Colour Graphite
Material Galvanised Steel
Life Expected 50 Years +
Size 125mm
£28.90 £24.08 £36.12 £30.10 Save 20%
Spend another £1500 to pay over time with Klarna

Since our square steel gutters are not symmetrical, we offer both internal and external corners.

An internal corner is used on an inwards corner that joins two walls together at a 90 degree angle on the property. These corners are fitted with fold over tabs that ensure any lengths attached to it are firmly locked in place with an easy fitting process.

Please note, the internal corner does not feature a seal and should therefore be mounted directly with the gutter using steel glue. Once mounted, press the glued area down and bend the mounting plate. Finally, make a tight joint with glue on the edge of the gutter installed inside the corner. Please make sure that there is 7cm overlap when joining corners with lengths.

YOU MAY ALSO LIKE