Round Downpipe - 68mm x 2.5mtr Cast Iron Effect
|Colour||Cast Iron Effect|
|Dimension||68mm (H) x 68mm (W) x 2500mm (L)|
|Specification||BS EN 1462|
Our 68mm downpipe is available in 2.5m lengths. Circular downpipe is usually used in conjunction with half round and deepflow gutter systems.
2.5m lengths are usually sufficient for rainwater pipe drops on single storey buildings but for two and three storey buildings the pipes can be joined together with pipe sockets. This is to imitate the way in which original cast iron pipe drops were created. The pipe has an outside diameter of 68mm.
Rainwater pipes are always a pushfit joint - never use silicon or solvent weld on these systems as there might be a requirement to take them apart for cleaning or unblocking at some point in the future.